GS 350 RWD V6-3.5L (2GR-FSE) (2007)
^
Do not press the protruding areas around ports A and brackets B.
^
Do not use SST to press the areas indicated by the circle marks in the illustration. Use pliers and be careful not to damage the core plates.
(b) Check the lock plate height A after completing the caulking.
Standard plate height A: 8.8 mm (0.346 in.)
If the height is not as specified, readjust the stopper bolt of the handle and caulk the lock plate again.
4. INSTALL RADIATOR DRAIN COCK PLUG
(a)
Install a new O-ring to the drain plug.
(b) Install the drain plug.
5. INSPECT FOR WATER LEAKS