GS 350 RWD V6-3.5L (2GR-FSE) (2007)
27. REMOVE WATER PUMP ASSEMBLY
(a)
Remove the 16 bolts, water pump and gasket.
INSPECTION
1. INSPECT WATER PUMP ASSEMBLY
(a)
Visually check the water hole for coolant leakage.
If leakage is found, replace the water pump assembly.
(b) Turn the pulley and check that the water pump bearing moves smoothly and quietly.
If necessary, replace the water pump assembly.
INSTALLATION
1. INSTALL WATER PUMP ASSEMBLY
(a)
Install a new gasket and the water pump with the 16 bolts.
Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf) for bolt A
9.1 N*m (93 kgf*cm, 81 in.*lbf) for bolt B and C