GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1553001.png)
Condenser HVAC: Testing and Inspection
ON-VEHICLE INSPECTION
1. INSPECT COOLER CONDENSER ASSEMBLY
a. If the fins of the cooler condenser are dirty, clean them with water and dry them with compressed air.
NOTE: Do not damage the fins of the cooler condenser.
b. If the fins of the cooler condenser are bent, straighten them using a screwdriver or pliers.
2. CHECK CONDENSER FOR LEAKAGE OF REFRIGERANT
a. Using a halogen leak detector, check the pipe joints for refrigerant leakage.
b. If refrigerant leakage is detected in a joint, check the torque of the joint.
