GS 350 RWD V6-3.5L (2GR-FSE) (2007)
11. CONNECT SPEED SENSOR FRONT (for 2WD)
a. Connect the speed sensor connector to the seed sensor front.
NOTICE: Do not twist the sensor wire.
12. INSTALL SPEED SENSOR FRONT (for 4WD)
a. Install the speed sensor to the steering knuckle with the 2 bolts.
Torque:
Bolt (A) 6.0 Nm (61 kgf-cm, 53 inch lbs.)
Bolt (B) 8.5 Nm (87 kgf-cm, 75 inch lbs.)
NOTICE:
^
Prevent foreign matter from adhering to the speed sensor.
^
Be careful not to damage the speed sensor.
^
Do not twist the sensor wire when installing the speed sensor.
13. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
14. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT (for 4WD)
15. CHECK ABS SPEED SENSOR SIGNAL