GS 350 RWD V6-3.5L (2GR-FSE) (2007)
6. REMOVE CONSOLE BOX PLATE
7. REMOVE CONSOLE BOX REGISTER ASSEMBLY
8. REMOVE CONSOLE BOX
9. REMOVE REAR CONSOLE ARMREST ASSEMBLY
10. REMOVE CONSOLE BOX SUB-ASSEMBLY UPPER
11. REMOVE POWER OUTLET SOCKET ASSEMBLY
a. Rotate the socket to disengage the notch.
b. Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.
c. Remove the socket from the cover.
INSTALLATION
1. INSTALL POWER OUTLET SOCKET ASSEMBLY
a. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
b. Connect the connector.