GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Accelerator Pedal: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE ACCELERATOR PEDAL
a. Disconnect the accelerator pedal position sensor connector.
b. Remove the 2 bolts and accelerator pedal.
NOTE:
-
Avoid physical shock to the accelerator pedal.
-
Do not disassemble the accelerator pedal assembly.
INSTALLATION
NOTE:
-
Avoid physical shock to the accelerator pedal.
-
Do not disassemble the accelerator pedal assembly.
1. INSTALL ACCELERATOR PEDAL