GS 350 RWD V6-3.5L (2GR-FSE) (2007)
d. Align the protrusion of the fuel return vent tube subassembly and the cutout of the fuel tank.
e. While holding the fuel tube by hand, align the starting marks of a new fuel pump gauge retainer and the fuel tank. Then install the fuel pump
gauge retainer to the fuel tank.
f.
Using a 6 mm socket, set SST to the fuel pump gauge retainer.
SST 09808-14020
HINT: Fit the tips of SST on the ribs of the retainer.
NOTE: Use SST. Do not any other tools such as a screwdriver.