GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Air Bag: Removal and Replacement
Curtain Shield Airbag Assembly
Curtain Shield Airbag Assembly
CURTAIN SHIELD AIRBAG ASSEMBLY
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE ROOF HEADLINING ASSEMBLY
HINT: Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY".
3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY
a. Disconnect the connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
b. Remove the 2 clips.