GS 350 RWD V6-3.5L (2GR-FSE) (2007)
a. Operate the power seat switch knob and move the seat to the rearmost position.
b. Using a screwdriver, detach the 4 claws and remove the seat track bracket cover front inner and outer.
HINT: Tape the screwdriver tip before use.
c. Remove the 2 bolts on the front side of the seat.
d. Operate the power seat switch knob and move the seat to the foremost position.
e. Using a screwdriver, detach the 4 claws and remove the seat track bracket cover rear inner and outer.
f.
Remove the 2 bolts on the rear side of the seat.
g. Disconnect the connectors under the seat. Then remove the seat.
4. REMOVE FRONT SEAT INNER BELT ASSEMBLY
a. Disconnect the connector.
b. Remove the seat belt's wire harness clamp.
c. Remove the nut and seat belt.
INSTALLATION