GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1656005.png)
3. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
a. Move the seat using the power seat switch knob so that the seat belt anchor bolt is revealed.
b. Install the front seat outer belt anchor with the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
c. Install the seat belt anchor cover cap.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Front Seat Outer Belt Assembly
