GS 350 RWD V6-3.5L (2GR-FSE) (2007)
e. Remove the 2 bolts and seat belt.
9. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
a. Remove the bolt.
b. Rotate the adjuster approximately 90°.Then pull and remove it.
INSTALLATION
HINT: The installation procedures are the removal procedures in reverse order.
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
a. Insert the tip of the adjuster into the pillar, and align the adjuster's bolt hole to the pillar's bolt hole.
b. Install the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY