GS 350 RWD V6-3.5L (2GR-FSE) (2007)
1.
Disconnect the front seat outer belt assembly.
A.
Detach the 6 claws and remove the seat belt anchor cover cap.
B.
Move the seat using the power seat switch knob so that the seat belt anchor bolt is revealed.
C.
Remove the bolt and front seat outer belt anchor.
D.
Disconnect the connector.
2.
Remove the front seat cushion shield with the No. 1 cushion shield inner.
A.
Disconnect the 2 rubber bands of the front seatback board from the front seat frame.
B.
Disconnect the connector from the No.1 interior illumination light assembly.