GS 350 RWD V6-3.5L (2GR-FSE) (2007)
1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the engine switch on (IG).
3. Check the DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester operator's manual for further details.
Without Scan Tool
LEXUS does not provide a procedure for Reading Trouble Codes Without Scan Tool.
Symptom Index
PROBLEM SYMPTOMS TABLE
HINT:
-
Use the table given to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in
the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as
necessary.
-
Inspect the fuses and relays related to this system before inspecting the suspected areas given.
Problem Symptoms Table - Occupant Classification System
Trouble in Passenger Airbag ON / OFF Indicator
Trouble in Passenger Airbag ON / OFF Indicator
DESCRIPTION
The occupant classification system detects the front passenger seat condition. It then informs a passenger of the front passenger airbag and front seat side
airbag condition (activated/not activated) by the passenger airbag ON/OFF indicator.
HINT: Approximately 6 seconds after the engine switch is turned on (IG), the passenger airbag ON/OFF indicator will be ON/OFF depending on the
conditions listed given.