GS 350 RWD V6-3.5L (2GR-FSE) (2007)
d. Using a vernier caliper, measure the snap ring length.
Maximum length: 5.0 mm (0.197 in)
If the length is greater than the maximum, replace the snap ring with a new one.
4. INSTALL STARTER COMMUTATOR END FRAME COVER
a. Install the starter commutator end frame cover to the starter commutator end frame.
5. INSTALL STARTER ARMATURE PLATE
a. Insert the starter armature plate into the starter yoke.
b. Align the cutout of the plate with the inside protrusion of the starter yoke, and install the plate.
6. INSTALL STARTER COMMUTATOR END FRAME ASSEMBLY
a. Align the rubber of the starter commutator end frame with the cutout of the starter yoke.
b. Install the starter yoke onto the starter commutator end frame.