GS 350 RWD V6-3.5L (2GR-FSE) (2007)
2. REMOVE SPEED SENSOR (NT)
(a)
Disconnect the sensor connector.
(b) Remove the bolt and speed sensor.
(c)
Remove the O-ring from the speed sensor.
3. REMOVE SPEED SENSOR (SP2)
(a)
Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
(c)
Remove the O-ring from the speed sensor.
INSPECTION
1. INSPECT SPEED SENSOR (NT)
(a)
Measure the resistance according to the value(s) in the table.
Standard resistance
If the resistance value is not as specified, replace the speed sensor.