GS 350 RWD V6-3.5L (2GR-FSE) (2007)
HINT:
-
Use the same procedures for both the RH and LH sides.
-
The procedures listed are for the LH side.
1. INSTALL WIPER RUBBER
a. Install the 2 wiper rubber backing plates to the wiper rubber.
NOTE: Install the backing plates facing the correct direction.
b. Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.
HINT: Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.
c. Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.
NOTE: Push the wiper blade into the grooves of the wiper rubber to attach them completely.