GS 400 V8-4.0L (1UZ-FE) (1999)
/Page-246001.png)
Headlamp Switch: Service and Repair
1. REMOVE SPIRAL CABLE
Remove the 4 screws and the spiral cable.
2. REMOVE WIPER AND WASHER SWITCH
Remove the 2 screws and the wiper and washer switch.
3. REMOVE TILT AND TELESCOPIC SWITCH
Remove a screw and the tilt and telescopic switch.
4. REMOVE STEERING ANGLE SENSOR
Disengage the 2 claws and the steering angle sensor.
5. REMOVE LIGHT CONTROL SWITCH
Remove the 2 screws and the light control switch.
