GS 430 V8-4.3L (3UZ-FE) (2004)
2. DISCONNECT FLEXIBLE HOSE.
Remove the union bolt and gasket from the caliper, then disconnect the flexible hose from the caliper. Use a container to catch brake fluid as it
drains out.
Torque: 30 Nm (310 kgf-cm, 22 ft. lbs.)
HINT: At the time of installation, please refer to the following item. Install the flexible hose lock securely in the lock hole in the caliper.
3. REMOVE CALIPER
a. Remove the 2 installation bolts.
Torque: 104 Nm (1,065 kgf-cm, 77 ft. lbs.)
b. Remove the caliper.
4. REMOVE BRAKE PADS
a. Remove the anti-squeal spring.
b. Remove the clip and pad guide pin.
INSTALLATION
Installation is in the reverse order of removal.
HINT:
^
After installation, fill the brake reservoir with brake fluid and bleed brake system.
^
Check for leaks.
Disassembly and Assembly