GS 430 V8-4.3L (3UZ-FE) (2004)
3. REMOVE AMBIENT TEMPERATURE SENSOR
a. Disconnect the connector.
b. Using a clip remover, pull out the sensor from bumper reinforcement.
4. REMOVE EVAPORATOR TEMPERATURE SENSOR
a. Remove these parts:
1. No.1 undercover
2. No.1 safety pad
b. Remove the evaporator temperature sensor.
1. Using a screwdriver, pull out the sensor with bracket plate.
HINT: Tape the screwdriver tip before use.
2. Release the 2 claws and remove the sensor from bracket plate.