GS 430 V8-4.3L (3UZ-FE) (2004)
2. INSTALL PS PUMP PULLEY
Using SST, install the PS pump pulley with the nut.
SST 09960-10010 (09962-01000, 09963-01000)
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
3. INSTALL DRIVE BELT
Install the drive belt by turning the drive belt tensioner counterclockwise.
HINT: The tensioner pulley bolt has a left-hand thread.
4. PERFORM ON-VEHICLE INSPECTION
5. INSTALL AIR CLEANER INLET
6. INSTALL ENGINE UNDER COVER
REPLACEMENT
1. REPLACE FRONT BEARING
a. Remove the 4 screws, bearing retainer and bearing.
b. Using SST and a press, press out the bearing.
SST 09950-60010 (09951-00260, 09952-06010)