GS 460 V8-4.6L (1UR-FSE) (2008)
Emergency Contact Module: Service and Repair
Removal
CELLULAR COMMUNICATION: MAYDAY ECU: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
(a) Remove the floor mat.
3. REMOVE LUGGAGE COMPARTMENT NO. 1 LIGHT ASSEMBLY
(a) Using a screwdriver, detach the claw and remove the light.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connector.
4. REMOVE TOOL BOX
(a) Remove the tool box.
5. REMOVE REAR FLOOR FINISH PLATE