GS 460 V8-4.6L (1UR-FSE) (2008)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Removal
BRAKE CONTROL: BRAKE ACTUATOR (for 1UR-FSE): REMOVAL
BRAKE CONTROL: BRAKE ACTUATOR
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and
Repair/Removal
5. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and
Repair/Removal
6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal
7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal
8. REMOVE FRONT FENDER TO COWL SIDE SEAL LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal
9. REMOVE FRONT FENDER TO COWL SIDE SEAL RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal
10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and
Repair/Removal
11. PERFORM ACCUMULATOR PRESSURE ZERO DOWN See: Brake Bleeding/Service and Repair
12. BRAKE CONTROL OFF
NOTICE:
-
Prohibit the brake control certainly before air bleeding.
-
Be sure to remove the 2 ABS motor relays first, then the brake actuator.