GS 460 V8-4.6L (1UR-FSE) (2008)
Condenser HVAC: Service and Repair
Installation
AIR CONDITIONING: CONDENSER (for 1UR-FSE): INSTALLATION
AIR CONDITIONING: CONDENSER
1. INSTALL COOLER CONDENSER ASSEMBLY
(a) Install the cooler condenser with the 4 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
HINT:
If the condenser is replaced with a new one, add compressor oil to the new condenser.
Capacity:
40 cc (1.4 fl. oz.)
Compressor oil:
ND-8 or equivalent
2. INSTALL DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the vinyl tape attached to the pipe and connecting part of the cooler condenser.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil:
ND-OIL 8 or equivalent
(c) Install the O-ring on the discharge hose subassembly.
(d) Install the discharge hose sub-assembly on the cooler condenser with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 47 in-lbf)
3. INSTALL LIQUID TUBE SUB-ASSEMBLY A
(a) Remove the vinyl tape attached to the pipe and connecting part of the cooler condenser.
(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
Compressor oil:
ND-OIL 8 or equivalent
(c) Install the O-ring on the liquid tube sib-assembly A.
(d) Install the liquid tube sib-assembly A on the cooler condenser with the 2 bolts.