GS 460 V8-4.6L (1UR-FSE) (2008)
(c) Install the pipe to the oil filter cap.
NOTICE:
If the O-ring is removed with the drain plug, install the O-ring together with the pipe.
HINT:
Use a container to catch the draining oil.
(d) Check that oil is drained from the oil filter. Then disconnect the pipe and remove the O-ring, as shown in the illustration.
(e) Using SST, remove the oil filter cap.
SST: 09228-06501
NOTICE:
Do not remove the oil filter bracket clip.
(f) Remove the oil filter element and O-ring from the oil filter cap.
NOTICE:
Be sure to remove the O-ring (for the cap) by hand, without using any tools, to prevent damage to the groove.
4. INSTALL OIL FILTER ELEMENT