GS 460 V8-4.6L (1UR-FSE) (2008)
(d) Install the 8 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
(e) Connect the 8 ignition coil connectors.
3. INSTALL WIRE HARNESS CLAMP BRACKET
(a) Install the bolt, wire harness clamp bracket and wire harness clamp.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Install the 2 wire harness clamps.
4. INSTALL NO. 1 ENGINE ROOM RELAY BLOCK ASSEMBLY
(a) Install the 2 bolts and nut.
Bolt - Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
Nut - Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
5. INSTALL BATTERY TRAY
(a) Install the battery tray with the 2 bolts.