GS 460 V8-4.6L (1UR-FSE) (2008)
Braking Sensor/Switch: Service and Repair
Removal
BRAKE CONTROL: BRAKE PEDAL STROKE SENSOR: REMOVAL
1. DISCONNECT BATTERY CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming and
Relearning/Steering Initialization.
2. REMOVE CONSOLE UPPER PANEL GARNISH FRONT See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
3. REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal
5. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
6. REMOVE FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
7. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
8. REMOVE INSTRUMENT PANEL NO.1 UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
9. REMOVE INSTRUMENT PANEL NO.1 SAFETY PAD SUB- ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
10. REMOVE INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1 See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Driver Side Knee Airbag Assembly/Removal
11. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY
(a) Disconnect the brake pedal stroke sensor assembly connector.
(b) Remove the 2 nuts and the brake pedal stroke sensor assembly.