GS 460 V8-4.6L (1UR-FSE) (2008)
1. REMOVE NO. 2 ENGINE UNDER COVER
2. REMOVE SPEED SENSOR (NT)
(a) Disconnect the sensor connector.
(b) Remove the bolt and speed sensor.
(c) Remove the O-ring from the speed sensor.
3. REMOVE SPEED SENSOR (SP2)
(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
(c) Remove the O-ring from the speed sensor.
Installation
A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION
1. INSTALL SPEED SENSOR (SP2)
(a) Coat a new O-ring with ATF and install it to the speed sensor.
(b) Install the speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the sensor connector.
2. INSTALL SPEED SENSOR (NT)
(a) Coat a new O-ring with ATF and install it to the speed sensor.
(b) Install the speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)