GS 460 V8-4.6L (1UR-FSE) (2008)
(b) Using a brush, apply Primer M to the exposed part of the vehicle body.
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Do not apply primer to the adhesive.
-
Throw away any leftover primer.
-
Do not apply too much primer.
(c) Using a brush or sponge, apply Primer G to the contact surface of the glass.
HINT:
If the primer is applied to an area that is not specified, apply white gasoline to a clean cloth and wipe off the excess primer.
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.
(d) Apply adhesive to the glass.
Adhesive:
Part No. 08850-00801 or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.
HINT:
After cutting off the tip, use all adhesive within the time written in the table below.
Usage timeframe: