GX 470 V8-4.7L (2UZ-FE) (2004)
4.
Remove the power window regulator master switch assembly.
A.
Using the taped screwdriver, disengage the 2 claws and 2 clips, and then remove the armrest base panel upper together with the master
switch assembly.
B.
Disconnect the master switch connector.
C.
Remove the 3 screws and the master switch from the armrest base panel upper.
5.
Remove the front door trim board sub-assembly.
A.
Remove the 2 rubber cushions.
B.
Remove the 3 screws and clip.
C.
Using a clip remover, remove the other 10 clips.
D.
Remove the trim board upward.
HINT:
In order to prevent the door panel from being damaged, cover the parts indicated by the arrows in the illustration with tape.