GX 470 V8-4.7L (2UZ-FE) (2004)
B. For heated mirrors: Resecure the heater terminals.
C. Hook the upper claws of the mirror holder into the plate pivot.
D. Reconnect the mirror holder - Apply pressure to the indicated areas until you hear the holder clips snap into place.
If pressure is applied in areas other than the ones indicated, the mirror glass may break.
4. Repeat steps 1B through 3D on the opposite side rear view mirror.
5. Reconnect the negative (-) battery terminal.
6. Test normal operation of mirrors.
7. Remove the protective tape and clean the mirror housing and glass.
8. Re-initialize power Systems.
^
2003 MY
PD018-05: "Initialization of Power Window During PDS"
PG016-02: "Moon Roof Initialization"
^
2004 MY
PD018-05: "Initialization of Power Window During PDS"
PG016-02: "Moon Roof Initialization"
^
2005 MY