GX 470 V8-4.7L (2UZ-FE) (2004)
B. Gently disconnect the three (3) connectors from the mirror actuator.
NOTE
Disconnect the hidden 5-pin connector by pushing down on the lock tab.
C. Remove the OLD actuator and discard.
3. Assemble a NEW actuator and mirror.
Reassembly is the reverse order of disassembly. You MUST fit in the harness connector correctly.
Confirm correct connector color indication on the back surface of the mirror actuator (one gray and one black flat 2-pin connector).
A. Tighten the three (3) screws for the actuator.
Torque: 1.5-1.96 N*m (15.30-19.99 kgf*cm, 13.28-17.35 ft*lbf)