GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-920002.png)
a) Disconnect the stop lamp switch connector from the stop lamp switch assembly.
b) Remove the bolt from the brake pedal support reinforcement.
c) Loosen the bolt and nut.
d) Remove the 4 nuts and brake pedal support sub-assembly.
13. REMOVE BRAKE PEDAL RETURN SPRING
14. REMOVE BRAKE PEDAL
a) Remove the bolt and nut, then remove the brake pedal support reinforcement from the brake pedal support sub-assembly.
b) Remove the bolt and nut, then remove the brake pedal sub-assembly from the brake pedal support assembly.
c) Remove the 4 brake pedal bushes from the brake pedal and brake pedal lever.
d) Remove the 2 collars from the brake pedal sub-assembly and brake pedal lever.
e) Using a screwdriver, remove the 2 E-rings from the brake pedal link pin.
f) Remove the 2 brake pedal link pins, 2 brake pedal shaft collars and 2 brake pedal links.
g) Remove the brake pedal lever from the brake pedal sub-assembly.
