GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-942001.png)
Parking Brake Cable: Service and Repair
PARKING BRAKE CABLE ASSEMBLY NO. 3
REPLACEMENT
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH
a) Remove the 2 bolts and separate the rear disc brake caliper assembly LH
HINT: Do not disconnect the flexible hose from the brake caliper
3. REMOVE REAR DISC
4. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING
5. REMOVE PARKING BRAKE SHOE STRUT COMPRESSION SPRING
6. REMOVE PARKING BRAKE SHOE STRUT LH
7. REMOVE PARKING BRAKE SHOE
8. REMOVE CONSOLE UPPER PANEL GARNISH NO.2
9. REMOVE CONSOLE UPPER PANEL GARNISH NO.1
10. REMOVE CONSOLE PANEL UPPER ASSEMBLY
11. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
12. REMOVE RR CONSOLE BOX ASSEMBLY
13. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 3
a) Loosen the adjusting nut.
