GX 470 V8-4.7L (2UZ-FE) (2004)
c) Remove the adjusting nut.
d) Separate the parking brake cable assembly No. 2 and No. 3 from the parking brake pull rod sub-assembly No. 1.
e) Remove the parking brake pull rod sub-assembly No.1, bush and compression spring from the parking brake lever.
f) Remove the straight pin from the parking brake lever.
g) Remove the 2 bolts, washer and parking brake lever support from parking brake lever sub-assembly.
h) Remove the 2 bolts and parking brake lever sub-assembly.
7. REMOVE PARKING BRAKE SWITCH ASSEMBLY
a) Remove the screw and parking brake switch assembly.
8. INSTALL PARKING BRAKE SWITCH ASSEMBLY
a) Install the parking brake switch assembly with the screw.
9. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
a) Install the parking brake lever sub-assembly, temporarily tighten the 2 bolts.