GX 470 V8-4.7L (2UZ-FE) (2004)
c) Apply the high temperature grease to the adjusting bolt and piece.
d) Install the shoe adjusting screw set and tension spring to the front and rear shoe.
e) Install the 2 pins, 4 cups and 2 shoe hold-down springs.
f) Connect the parking brake cable to the shoe lever.
g) Install the front and rear parking brake shoe.
13. INSTALL PARKING BRAKE SHOE STRUT LH
14. INSTALL PARKING BRAKE SHOE STRUT COMPRESSION SPRING
15. INSTALL PARKING BRAKE SHOE RETURN TENSION SPRING
a) Using a needle nose pliers, install the 2 return tension springs.
HINT: Install front side spring first, rear side spring next.
16. CHECK PARKING BRAKE INSTALLATION
a) Check that each part is installed properly.
NOTICE: There should be no oil or grease adhering to the friction surface of the shoe lining and disc.
17. INSTALL REAR DISC