GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-433002.png)
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
c. Using a 24 mm deep socket wrench, Install the oil pressure switch.
Torque: 15 Nm (152 kgf-cm, 11 ft. lbs.)
NOTICE: Do not start the engine 1 hour after the installation.
d. Connect the oil pressure switch connector.
8. START ENGINE AND CHECK FOR LEAKS
INSPECTION
1. INSPECT OIL COOLER ASSY
a. Check the oil cooler for damage or clogging.
If necessary, replace the oil cooler.
