GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-1258003.png)
11. REMOVE BLOWER MOTOR CONTROL
a. Remove the 2 screws and the blower motor control.
12. REMOVE COOLING UNIT MOTOR SUB-ASSY W/ FAN
a. Remove the 3 screws and the cooling unit motor sub-assy W/ fan.
13. INSTALL BLOWER ASSY
a. Install the blower assy with the claw fitting.
b. Install the bolt, the 2 screws and the nut.
Torque:
9.8 Nm (100 kgf.cm, 87 in.lbf) (Bolt)
5.4 Nm (55 kgf.cm, 48 in.lbf) (Nut)
