GX 470 V8-4.7L (2UZ-FE) (2004)
D.
After installing the oil cooler tube, add an additional 5 cc to 10 cc of A/T oil to the transmission.
13.
Install the A/T oil cooler by tightening all 3 bolts as shown in the illustration.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
14.
Prepare the headlamp hole seal RH.
Before November 2004 production:
A.
Using Seal, Radiator Side RH (P/N: 53285-60080) as a template, locate the reference nu shown in the illustration.
B.
Align the seal to the headlamp hole area.
C.
Using the seal as a template, center punch the 3 locations shown in the illustration.
D.
Drill three 7-mm (0.28 in.) holes in the punch locations shown in the illustration.
From December 2004 to January 2006 production:
A.
Remove the air shield plate (DO NOT REUSE) from the RH headlamp area.