GX 470 V8-4.7L (2UZ-FE) (2004)
NOTE:
Some compressors will need to have the A/C cooler refrigerant suction hose retaining stud moved from "A" to "B" as shown.
Torque: 9.8 N.m
(100 kgf.cm, 87 in.lbf)
29.
Install the upper clip on the front fender apron seal LH (in left wheel well) by engaging the 2 upper clips on the front fender apron seal.
30.
Install the A/C cooler refrigerant suction hose sub-assembly from under the vehicle working your way up into the engine compartment Tighten the
bolt.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)