GX 470 V8-4.7L (2UZ-FE) (2004)
39.
Install the bracket cooler RH and LH by tightening the bolt.
Torque: 47 N.m
(479 kgf.cm, 416 in.lbf)
Bracket Cooler: P/N 88688-6A770
Bolt Hexagon: P/N 90105-12122
NOTE:
^
"L" is marked on the bracket cooler LH.
^
"R" is marked on the bracket cooler RH.
40.
Apply seal packing to center position of the front engine under cover sub-assembly.
Seal Packing: P/N 36867-60080
41.
Apply seal packing to the right and left of the front engine under cover sub-assembly.
Seal Packing: P/N 36867-60090