GX 470 V8-4.7L (2UZ-FE) (2004)
A.
Disconnect the 2 pressure switch connectors (high and low).
B.
Remove the clip.
19.
Remove the nut and the NC suction hose.
20.
Remove the front accessory A/C tube.
A.
Remove the nut and bolt.
B.
Remove the pipe.
C.
Remove the foam seal between the line and the core support.
NOTE:
^
Do NOT reuse the pipe and seal.
^
Using a scraper (or equivalent), remove any remaining seal.
21.
Remove the A/T oil cooler hoses.