GX 470 V8-4.7L (2UZ-FE) (2004)
16.
Install the headlamp hole seal LH.
Before November 2004 production:
A.
Using Seal, Radiator Side LH (P/N: 53286-60080) as a template, locate the reference nut shown in the illustration.
B.
Align the seal to the headlamp hole area.
C.
Using the seal as a template, center punch the 3 locations shown in the illustration.
D.
Drill three 7-mm (0.28 in.) holes in the punch locations shown in the illustration.
From December 2004 to January 2006 production:
A.
Using Seal, Radiator Side LH (P/N: 53286-60080) as a template, locate the reference nut shown in the illustration.
B.
Align the seal to the headlamp hole area.
C.
Using the seal as a template, center punch 2 holes at positions 1 and 2 shown in the illustration.
D.
Drill 2 7 mm (0.28 in.) holes in the punch location positions 1 and 2 shown in the illustration.