GX 470 V8-4.7L (2UZ-FE) (2004)
A.
Connect the wire harness connector of the fog lamps.
B.
Engage the clip in front of the fender liner.
C.
Engage the 3 clips and install the 4 bolts and 8 screws.
53.
Install the air cleaner assembly.
A.
Install the lower air cleaner assembly with the 3 bolts.
B.
Install the air cleaner.
C.
Install the air cleaner cover.
D.
Connect the air cleaner hose and the air cleaner assembly and tighten the band.
E.
Connect the throttle w/motor body assembly connector.
F.
Install the throttle w/motor body assembly connector bracket.
54.
Apply the radiator support seal upper RH and LH.
Refer to the illustration and apply the 2 seals to the back side of the radiator support upper.
NOTE:
Align tape to edge of holes as shown in the illustration.
Seal Packing: P/N 36867-60020 (15x12x55 mm)
Seal Packing: P/N 36867-60030 (15x20x120 mm)