GX 470 V8-4.7L (2UZ-FE) (2004)
Low Tire Pressure Indicator: Service and Repair
REGISTRATION
1. REGISTER TRANSMITTER ID
NOTE: It is necessary to register the transmitter ID in the tire pressure monitor ECU when replacing the tire pressure monitor valve sub-assembly
and/or tire pressure monitor ECU.
a. Set the tire pressure of all wheels to the specified value.
b. Connect the hand-held tester to DLC3.
c. Turn the ignition switch to the ON position.
d. Read and record the transmitter ID by using the DATA LIST.
e. Select the registration mode "MAIN".
HINT: Select "2nd" when registering in 2nd.
f.
Input the transmitter ID using the hand-held tester and transmit it to the tire pressure monitor ECU.
g. Check that the transmitter ID registration is completed correctly.