GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-397003.png)
^
Mount the bottom bead following the tire equipment manufacturer's procedures. Use caution to prevent damaging the sensor.
11.
Mount the top bead.
^
Mount the top bead following the tire equipment manufacturer's procedures. Use caution to prevent damaging the sensor.
12.
Inflate the tire.
^
Inflate the tire to seat the beads, deflate, and then inflate to the recommended cold inflation pressure.
^
The run flat tire may need higher pressure than normal tires to seat the tire beads.
NOTE:
Never exceed tire manufacturer recommended pressure to seat beads.
