GX 470 V8-4.7L (2UZ-FE) (2004)
Required SSTs
Reset Procedure 1
1.
Connect the Lexus Diagnostic Tester to the vehicle.
2.
Reset the ECM (PCM). Refer to the procedures.
3.
Start the engine and warm it up to normal operating temperatures before test-driving.
4.
Perform a thorough test drive with several accelerations from a stop with "light throttle" application until proper transmission shifting is verified.
Reset Procedure 2
1.
Disconnect the negative battery cable for 5 minutes.
2.
Reconnect battery cable.
3.
Start the engine and warm it up to normal operating temperatures before test-driving.