GX 470 V8-4.7L (2UZ-FE) (2004)
9.
Install Steering Intermediate Shaft Cover. (See Figures 3 and 8.)
A.
Install the steering intermediate shaft cover with the 4 bolts.
Torque: 5 N.m (50 kgf.cm, 44 in..lbf)
10.
Install New Steering Sliding Yoke. (See Figures 3 and 9.)
A.
Install the steering sliding yoke to the steering column assembly and slide it upward.
B.
Install the steering sliding yoke to the intermediate shaft No. 2 with the 2 bolts.
NOTE:
Torque the sliding yoke bolts when the vehicle is resting on the ground.
Torque: 36 N.m (370 kgf.cm, 26 ft.-lbf)
11.
Install Front Fender Splash Shield.