GX 470 V8-4.7L (2UZ-FE) (2004)
5.
Remove Steering Sliding Yoke. (See Figures 3 and 5.)
A.
Remove the 2 bolts from the steering sliding yoke.
B.
Slide the steering sliding yoke up and separate it from the steering intermediate shaft sub-assembly No. 2.
C.
Pull down the steering sliding yoke from the steering intermediate shaft assembly to remove.
6.
Remove Steering Intermediate Shaft Cover. (See Figures 3 and 6.)
A.
Remove the 4 bolts and steering intermediate shaft cover.
7.
Remove Steering Intermediate Shaft No. 2. (See Figures 3 and 7.)
A.
Align the matchmarks on the power steering gear assembly and the intermediate shaft No. 2.
B.
Remove the bolt and intermediate shaft sub-assembly No. 2 from the power steering gear assembly.
8.
Install New Steering Intermediate Shaft No. 2. (See Figures 3 and 7.)
A.
Align the matchmarks on the power steering gear assembly and the intermediate shaft No. 2.
B.
Install the steering intermediate shaft No. 2 to the steering gear box with the bolt.
Torque: 36 N.m (370 kgf.cm, 26 ft.-lbf)