GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-1006.png)
The inspection procedures are shown in the table. This table allows efficient and accurate troubleshooting using the diagnostic trouble codes displayed in
the diagnostic trouble code chart. Proceed with troubleshooting in accordance with the inspection procedures listed in the diagnostic chart corresponding
to the diagnostic trouble codes displayed. The diagnostic trouble code chart for the Supplemental Restraint System is shown as an example.
Electronic Circuit Inspection Procedure
Electronic Circuit Inspection Procedure
1. BASIC INSPECTION
a. RESISTANCE MEASURING CONDITION OF ELECTRONIC PARTS
1. Unless stated, all resistance is measured at an ambient temperature of 20 °C (68 °F). As the resistance may be outside the specifications if
measured at high temperatures immediately after the vehicle has been running, measurements should be made when the engine has cooled
down.
