GX 470 V8-4.7L (2UZ-FE) (2004)
NOTE:
-
When dimension V of the cardboard box exceeds the diameter of the disc wheel with tire to which the horn button assy is tied, X should be
the following size. X = 460 mm (18.11 in.) + width of tire
-
If a cardboard box smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag deployment.
-
Covering method using tires:
Place at least 3 tires with no disc wheels on top of the tire with disc wheel to which the horn button assy is tied.
Tire size: Must exceed the following dimensions
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION: Do not use tires with disc wheels.
NOTE: The tires may be marked by the airbag deployment, so use the redundant tires.
f.
Deploy the airbag.
1. Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the battery negative (-) terminal.
2. Check that no one is within 10 m (33 ft) area around the disc wheel which the horn button assy is tied to.
3. Press the activation switch of the SST and deploy the airbag.
HINT: The airbag deploys as the LED of the SST activation switch comes on.
g. Dispose of the horn button assy (with airbag).
CAUTION:
-
The horn button assy is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a horn button assy with the deployed airbag.
-
Do not apply water, etc. to a horn button assy with the deployed airbag.